To install your Bell & Gossett DT-2 Drain-O-Tank Air Charger, follow these easy steps:
1. Isolate the compression tank in which the Drain-O-Tank is to be installed with shut of valves or drain the system.
2. Apply pipe joint compound conservatively to the male 1/2" NPT threads only.
3. Screw Drain-O-Tank into Compression Tank fitting on bottom of tank and tighten securely.
4. Repressurize the system.
Expansion tanks including the Bell & Gossett Drain-O-Tank can be found at www.supplyhouse.com
1. Isolate the compression tank in which the Drain-O-Tank is to be installed with shut of valves or drain the system.
2. Apply pipe joint compound conservatively to the male 1/2" NPT threads only.
3. Screw Drain-O-Tank into Compression Tank fitting on bottom of tank and tighten securely.
4. Repressurize the system.
Expansion tanks including the Bell & Gossett Drain-O-Tank can be found at www.supplyhouse.com
