When feeding a new line set through a wall, it is typically easier to feed the lines "out" from the inside of the house rather than "in" from the outside. This will minimize any damage to the suction line insulation when feeding the tube through the wall. It is always advisable to slowly roll the lines open to avoid putting any crimps in the copper. If you are faced with a tight radius bend, cut the suction line and braze a 90° or 45° fitting to avoid kinking the flexible tube.
Line sets, HVAC Air quality products, refrigerant line sets and air conditioning line sets can be found at www.supplyhouse.com
Line sets, HVAC Air quality products, refrigerant line sets and air conditioning line sets can be found at www.supplyhouse.com
